201 Stainless Steel Square Tube
201 square hollow section for indoor furniture, display racks and decorative fabrication.
- Section / wall
- 25 × 25 × 1.0 mm
- Length
- 6 m
- Grade
- 201
Angles, channels, bars, H-beams and shaped hollow sections, specified by grade, cross-section and finished length.
201 square hollow section for indoor furniture, display racks and decorative fabrication.
Drawing-based 304/316 shaped tube for furniture, automotive and special-equipment components.
Hot-rolled 304 angle bar for equipment supports, structural components and decorative fabrication.
304 hot-rolled flat bar for machinery parts, hardware and general fabrication.
304 stainless steel H-section for structural fabrication and machinery-base requirements.
Solid 304 cold-drawn round bar for machining, shaft parts and fastener components.
316L channel section for equipment frames and industrial fabrication requirements.
Specify angle legs, channel dimensions, bar diameter or width and thickness. State finished length and any cutting or machining requirements.
Square and special-shaped tubes are maintained here by cross-section. Specify wall thickness and a section drawing where needed; do not treat them as solid bars.
The listed range includes 304 angle, round bar, H-beam and flat bar; 316L channel; 201 square tube; and drawing-based 304/316 shaped tube. Dimensions belong to individual listings.
Cut-length and drawing-based processing are reviewed against the selected section. Hot-rolled, cold-drawn and bright conditions apply only where that product lists them.
MTC and third-party inspection requirements are agreed for the grade, section, delivery condition and supplied batch. No common load rating is stated for every profile.

Listed section sizes are product-specific, not a complete stock schedule. Confirm the grade, dimensions, tolerances and delivery condition together.
Give grade, section shape, all cross-section dimensions, length and quantity. Include wall thickness for hollow sections and a drawing for a non-standard profile.
The 304/316 special-shaped tube listing covers drawing-based sections such as oval, D-shaped and grooved forms. Shape, tooling, wall thickness and acceptance tolerances require review.
No. Design loads and service conditions must be assessed against the governing project specification. A section size or material name is not a certified load rating.

CONTACT
Send grade, size, quantity and destination for a formal quotation.
B2B orders only — no retail cut pieces or personal orders.