ASTM A1008 CS Type B Cold-Rolled Steel Sheet
Cold-rolled carbon steel sheet for formed appliance, automotive and cabinet components.
- Thickness
- 0.3–3.0 mm
- Width
- 600–1500 mm
- Length
- As required
Hot- and cold-rolled carbon steel sheet, structural and alloy plate, pressure-vessel plate and hot-rolled coil for industrial procurement.
Cold-rolled carbon steel sheet for formed appliance, automotive and cabinet components.
Hot-rolled carbon steel in coil form for downstream pipe-making and industrial fabrication.
Hot-rolled carbon steel sheet for structural and machinery fabrication, with grade and thickness applicability confirmed by order.
1.25Cr-0.5Mo alloy steel plate listed as A387 Grade 12 Class 2 for elevated-temperature equipment material requirements.
3Cr-1Mo chromium-molybdenum alloy plate listed as ASTM A387 Grade 21, with normalized-and-tempered or annealed delivery options for pressure-vessel fabrication.
Chromium-molybdenum alloy steel plate listed as A387 Grade 22 Class 2 for boiler, steam-system and pressure-vessel material inquiries.
2.25Cr-1Mo pressure-vessel plate, 6–100 mm; class confirmed with the order.
Quenched-and-tempered alloy steel plate listed as ASTM A514 Grade Q for engineered load-bearing component inquiries.
ASTM A516 Gr.60 and Gr.70 carbon steel plate for welded pressure vessels in moderate and lower-temperature service, supplied as rolled or normalized by order.
A572 Grade 50 plate for heavy structural and machinery-component material inquiries.
High-strength structural plate listed as ASTM A572 Grade 65 for frames, bridges and heavy construction inquiries.
A1011 hot-rolled sheet and coil have separate length and coil-weight requirements. A1008 cold-rolled sheet has its own forming and size range.
Select the actual grade, class where applicable, delivery condition and testing. Strength, pressure or temperature acceptance belongs to the project specification.
Listings distinguish A1011 sheet and coil, A1008 cold-rolled sheet, A572 Grades 50/65, A514 Grade Q, A387 Grade 21, general Grade 22 pressure-vessel plate, the separate Grade 22 Class 2 and Grade 12 Class 2 listings, and A516 Grade 60/70 carbon steel pressure-vessel plate. Q235/Q345 requirements can be reviewed separately; no ASTM/EN equivalence is assumed.
Cut-to-length and drawing-based cutting can be reviewed with plate dimensions and finished-part requirements. State hole locations, edge preparation and any bending or welding requirements for assessment.
MTC and inspection requirements are agreed for the selected grade, standard and supplied batch. Third-party inspection may be discussed at quotation; a plate photograph or a different material's report does not establish compliance.

Grade, governing standard, dimensions and delivery condition are checked together. Listed ranges require standard-scope review, not an assumption of compliance in every thickness.
No automatic equivalence is stated. Provide the specified standard, grade, delivery condition and acceptance requirements for review.
Send plate grade, thickness, finished dimensions, quantities and drawing tolerances. Cutting, edge preparation, packing and loading are reviewed with the quotation.
No. Ordinary carbon plate, structural/alloy plate and NM-series or overlay wear plate have separate material requirements. Use the wear-resistant plate category for abrasion-service inquiries.

CONTACT
Send grade, size, quantity and destination for a formal quotation.
B2B orders only — no retail cut pieces or personal orders.